Graph Ranges

The range of each signal can be selected as either 'Auto' or 'Fixed'.

Auto: the trend line of that signal will display the maximum value at the top of the graph. The Y-axis will be automatically calibrate to the maximum value achieved.

Fixed: the display will be scaled against the relevant value entered as the Range.

Analogue Signals

Each In-Site channel (separate Processing Plant/CIP stream) is capable of monitoring up to 10 individual analogue signals simultaneously.

The order that the signals are initially setup in the main configuration file can be changed to a preferred order. These changes will then apply to the Verification Report or Graph Display.

The initial setup order is that shown in the 1^st column (Input #1, etc.), the display order as shown on reports is shown in the 2^nd column (index). Each analogue signal can be set to display up to 3 decimal placings. The title of each signal and unit of measurement is determined by each separate user site.

The Graph Range Control display will show the analogue signals in the order that they are shown in the Index column of the Analogue configuration display.

Analogue Signals can be re-positioned at any time. If changed, the new order/position of the analogue signals will apply retrospectively to all previous In-Site records applicable to that channel.